• ×

    Product :
    Other

    inner-page-bg
    product-vhf-banner-img
    product-vhf-banner-img
    Model Description Application Phase Noise (100 kHz) Size

    Directional Coupler (LNDC)

    • Low Noise Directional Coupler (LNDC)

    • Input Frequency from 5 MHz to 1 GHz, fixed
    • Integral Coupler, Amplifier and Attenuators
    • Input Level: +10 dBm, minimum
    • Output Level (Main Line): 1.5 dBm < Input Level
    • Output Level (Coupled Line): To +20 dBm (Consult Factory)
    • Port-to-Port Isolation: 20 dB, typical
    • Intrinsic Phase Noise Floor to -165 dBc/Hz (Input Referred)
    • Current Draw: 80 mA, typical
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 1.25 x 1.25 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Integrated Mixer (LNIMX)

    • Low Noise Integrated Mixer (LNIMX)

    • Mixer Selected Based on Frequencies Required
    • Integral Attenuators to Adjust Levels as Required
    • LO Frequency Range – Up to 3.4 GHz, fixed
    • RF Frequency Range – Up to 2 GHz, fixed
    • Output Frequency: Up to 2 GHz
    • (Raw Unfiltered Sum, Difference and Originals)
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 2.5 x 1.5 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Low Noise Mixer (LNMX)

    • Low Noise Mixer (LNMX)

    • Standard Mixer – M/A COM P/N: M8TH
    • Integral Attenuators to Adjust Levels as Required
    • Frequency Range – RF: 1-3400 MHz
    • Frequency Range – LO: 1-3400 MHz
    • Frequency Range – IF: 1-2000 MHz
    • LO Power: +23 dB, nominal
    • Conversion Loss: 8.0 dB, typical
    • Isolation: L-R, 35 dB; L-I, 35 dB ; R-I, 21 dB
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 1,25 x 1,25 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Phase Lock Loop (LNPLL)

    • Low Noise Phase Lock Loop (LNPLL)

    • Input Frequency from 5 MHz to 150 MHz, fixed
    • Integral Phase Detector, Amplifiers, Detectors and VReg
    • Type 1 or 2 Loop Options
    • Loop Bandwidth Optimized for Individual Application
    • Lock and Rail Detect Monitoring Options (TTL)
    • Current Draw: 100 mA
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 2.55 x 2.55 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Power Splitter (LNPS)

    • Low Noise Power Splitter (LNPS)

    • Input Frequency from 5 MHz to 2 GHz, fixed
    • Integral Splitter and Attenuators
    • Flexibility in Setting Gain and Input/Output Levels
    • Input Level: Up to +15 dBm
    • Insertion Loss: ≤ 3.5 dB
    • Port-to-Port Isolation: ≥ 20 dB
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 1.25 x 1.25 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Signal Translator (LNST)

    • Low Noise Signal Translator (LNST)

    • Input Frequency from 5 MHz to 160 MHz, fixed
    • Integral Waveform Converter, Amplifier and Filters
    • Sine-to-Square and Square-to-Sine Options Available
    • Sine, TTL, LVTTL, LVDS, and Others
    • Current Draw: 150 mA, typical
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 2 x 1.25 x 0.8"
    Model Description Application Phase Noise (100 kHz) Size

    Voltage Regulator (LNVR)

    • Low Noise Voltage Regulator (LNVR)

    • Input Voltage from +5 VDC to +28 VDC, fixed
    • Input Voltage Tolerance: Up to 10%
    • Output Voltage from +2.5 VDC to +25 VDC, fixed
    • Output Current Draw: ≤ 1 Amp, typical (Consult Factory)
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 1.75 x 2.5 x 1"
    Model Description Block Diagram Size

    Power Level Detector (TLPD)

    • Through-Line Power Level Detector (TLPD)

    • Input Frequency from 5 MHz to 2 GHz, fixed
    • Integral Coupler, RMS Detector or Optional Comparator
    • Input Level: -5 dBm to +20 dBm, fixed
    • Monitor Window: Up to ±10 dB (relative to input power level)
    • Output (RMS Detector Option): 0 to +5 VDC, typical
    • Output (Comparator Option): TTL Compatible (5V)
    • Insertion Loss: 1 dB, typical @ 500 MHz
    • Current Draw: ≤ 30 mA
    • Nickel-Plated Machined Aluminum Housing
    • SMA(f) Input and Output Connectors, Standard

    		 1.25 x 1.25 x 0.8"